$1,095.00 – $1,135.00
Andersen Hitches have an almost cult like following. They are super light at only 23 kg and super effective at preventing sway, pushing the weight from the rear axels to the front axels, and reduced bouncing through the anti-bounce compression spring system. They are simply the most advanced weight distribution hitch on the road today!
“Patented Technology and Great Value.”
NOW AVAILABLE WITH DO35 ADAPTOR!!
Fast Delivery. Leaves our Brisbane warehouse in 1-2 business days.
Click on sizes below for exact prices.
Share On:
The Andersen Sway Control & Weight Distribution comes in two drop shank sizes 4” or 8” depending on the height variations between the Tow Vehicle towbar receiver and Trailer coupler. These variations will vary depending on your setup, we will show you how you can measure your Tow Vehicle towbar receiver and Trailer coupler to determine what drop shank you require for your towing application.
If you have an underslung coupler mounted on your drawbar as shown you will require to purchase the 12” Extender bracket kits. These kits are marked with an ‘X’ at the end of the part number you require E.g. AN3350-AU-X or AN3380-AU-X.
Note that the underslung coupling sits lower than a standard coupling and this lower position requires the extended brackets.
Brand | Andersen |
Model Number | AN3350-AU or AN3350-AU-X |
Finish Colour | Black |
Dimensions | As shown in diagram |
Tow Weight Rating | 3500kg GTM |
Tow Ball Weight | 350kg |
Warranty | Limited Lifetime |
Andersen AU | Andersen AUX | |
---|---|---|
Offroad Coupling Type: Hyland, McHitch, Tregg – Poly Block | No | No |
Offroad Coupling DO35 (Only with Optional Extra – AN3035 DO35 Adaptor) |
Yes | Yes |
Ball Type: Standard 50mm Ball, AL-KO 50mm Off-Road & low profile couplers, Hitchezy tow pillar | Yes | Yes |
Underslung Coupling (Mounted bottom or centre of A-Frame) | No | Yes |
Standard Coupling (Mounted top of A-Frame) | Yes | No |
Built in Anti-sway? | Yes–Via friction cone in the Housing | Yes – Via friction cone in the Housing |
Weight Distribution | Yes | Yes |
3500 Kg GTM Capacity | Yes | Yes |
Unhitch to Reverse | Reverse Friendly – Can be left connected | Reverse Friendly – Can be left connected |
Adjustable Shank Height | Yes | Yes |
Jockey Wheel mounted on Outside of A-Frame | Yes – Can be installed inside A-Frame | Yes – Can be installed inside A-Frame |
Jockey Wheel mounted on inside of A-Frame | Yes | Yes |
Drop Shank – Able to drill extra receiver hole | Yes – Holes must be at least 34mm Center to Center | Yes – Holes must be at least 34mm Center to Center |
ESC Compatible | Yes | Yes |
The Andersen Sway Control & Weight Distribution comes in two drop shank sizes 4” or 8” depending on the height variations between the Tow Vehicle towbar receiver and Trailer coupler. These variations will vary depending on your setup, we will show you how you can measure your Tow Vehicle towbar receiver and Trailer coupler to determine what drop shank you require for your towing application.
If you have an underslung coupler mounted on your drawbar as shown you will require to purchase the 12” Extender bracket kits. These kits are marked with an ‘X’ at the end of the part number you require E.g. AN3350-AU-X or AN3380-AU-X.
Note that the underslung coupling sits lower than a standard coupling and this lower position requires the extended brackets.
Brand | Andersen |
Model Number | AN3350-AU or AN3350-AU-X |
Finish Colour | Black |
Dimensions | As shown in diagram |
Tow Weight Rating | 3500kg GTM |
Tow Ball Weight | 350kg |
Warranty | Limited Lifetime |
Andersen AU | Andersen AUX | |
---|---|---|
Offroad Coupling Type: Hyland, McHitch, Tregg – Poly Block | No | No |
Offroad Coupling DO35 (Only with Optional Extra – AN3035 DO35 Adaptor) |
Yes | Yes |
Ball Type: Standard 50mm Ball, AL-KO 50mm Off-Road & low profile couplers, Hitchezy tow pillar | Yes | Yes |
Underslung Coupling (Mounted bottom or centre of A-Frame) | No | Yes |
Standard Coupling (Mounted top of A-Frame) | Yes | No |
Built in Anti-sway? | Yes–Via friction cone in the Housing | Yes – Via friction cone in the Housing |
Weight Distribution | Yes | Yes |
3500 Kg GTM Capacity | Yes | Yes |
Unhitch to Reverse | Reverse Friendly – Can be left connected | Reverse Friendly – Can be left connected |
Adjustable Shank Height | Yes | Yes |
Jockey Wheel mounted on Outside of A-Frame | Yes – Can be installed inside A-Frame | Yes – Can be installed inside A-Frame |
Jockey Wheel mounted on inside of A-Frame | Yes | Yes |
Drop Shank – Able to drill extra receiver hole | Yes – Holes must be at least 34mm Center to Center | Yes – Holes must be at least 34mm Center to Center |
ESC Compatible | Yes | Yes |
Black Jack Trailer Jacks is all about legendary service. We offer free and same day shipping.
Not happy with your product? Simply return it within 14 days for a full refund. No questions. Buy with confidence.
Black Jack Trailer Jacks is a division of Titan RV, a proudly Australian owned family business located in Brisbane, Queensland.
That means you can buy with confidence knowing that you are supporting an Aussie company with local support. Titan RV source 99% of their products from quality manufacturers in Australia and the USA.
We were founded on three core beliefs: Honesty, Reliability and Value which we strive to incorporate into all aspects of our business. These core beliefs are integrated into every product and every sale we make.
We pride ourselves in making available a range of quality products designed and tested for durability and performance, because when you are west of Timbuctoo, you need reliability of your equipment. Customer service is always our top priority.
If you have any questions or comments, feel free to contact us and rest assured that you will be speaking to an expert.
"*" indicates required fields
5 star | 0% | |
4 star | 0% | |
3 star | 0% | |
2 star | 0% | |
1 star | 0% |
Sorry, no reviews match your current selections
Office Hours are Monday - Friday, 8.30am to 4.00pm. We are here for you and can assist in any way possible.